XC-11 Console

Description

Sample gas enters the console via a 1/4-inch stainless steel quick connect sample inlet. Sample gas flow is easily controlled by means of a panel-mounted needle valve with a round phenolic control knob and is displayed through an acrylic plastic rotameter mounted to the front panel. Two dial thermometers, one mounted to the meter inlet and one mounted to the meter outlet, measure the sample gas temperature entering and exiting the meter.

Features

• 1/4-inch stainless steel quick-connect sample inlet
• Sample gas flow is easily controlled by means of a panel-mounted needle valve with a round phenolic control knob
• All components are packaged neatly into a compact, durable, light weight transport case
• Acrylic plastic rotameter mounted to the front panel
• Two dial thermometers, one mounted to the meter inlet and one mounted to the meter outlet www.apexinst.com
• The system is similar to a Method 6 console with the exception of having no internal pump
• An external pump is used to purge the train after sampling
• 5-point low flow calibration • Precision dry gas meter securely mounted to the front panel

Specifications

• Dry gas meter: DGM-SK25EX., 0.7 liters per rotation
• DGM calibration: range: 0.05 to 2.5 LPM, 5-point low flow calibration, part number: DGMC-5A-LFB
• Inlet quick connect: 1/4-inch female quick connect, stainless steel
• DGM thermometers: dial-type inlet: 20°F to 130ºF, exhaust: 20°F to 130°F
• Rotameter: 0 to 2.5 LPM
• Flow control: panel-mounted needle valve
• Outlet: 1/4-inch stainless steel tube stub
• Transport case: 14.5” H x 11.5” W x 7.25” D (37 cm x 29 cm x 18.5 cm)
• Weight: 12 lbs (5.4 kg)